MODE-AM GROUP
050 AM LCUT FREQ
Function: Selects the cutoff frequency of the lower side of the RX audio filter in the AM mode.
Available Values: OFF, 100 ~ 1000 Hz (50 Hz/step)
Default Setting: OFF
051 AM LCUT SLOPE
Function: Selects the filter slope of the lower side of the RX audio filter in the AM mode.
Available Values: 6dB/oct or 18dB/oct
Default Setting: 6dB/oct
052 AM HCUT FREQ
Function: Selects the cutoff frequency of the upper side of the RX audio filter in the AM mode.
Available Values: OFF, 700 ~ 4000 Hz (50 Hz/step)
Default Setting: OFF
053 AM HCUT SLOPE
Function: Selects the filter slope of the upper side of the RX audio filter in the AM mode.
Available Values: 6dB/oct or 18dB/oct
Default Setting: 6dB/oct
054 AM MIC GAIN
Function: Sets the microphone gane for the AM mode.
Available Values: MVCR, 0 ~ 100
Default Setting: 30
When this menu is set to "MCVR", you may adjust the microphone gain using the front panel [MIC/SPEED] knob.
055 AM MIC SEL
Function: Selects the microphone to be useing in the AM mode.
Available Values: FRONT or DATA
Default Setting: FRONT
FRONT: Selects the microphone connected to the front panel MIC jack while using the AM mode.
DATA: Selects the microphone connected to pin 1 of the PACKET jack while using the AM mode.
End of Menu Item Details "Mode-AM Group"
|
MODE-CW GROUP
056 CW PITCH
Function: Adjusts your preferred CW tone pitch.
Available Values: 300 ~ 1050 Hz (50 Hz/step)
Default Setting: 700 Hz
057 CW LCUT FREQ
Function: Selects the cutoff frequency of the lower side of the RX audio filter in the CW mode.
Available Values: OFF, 100 ~ 1000 Hz (50 Hz/step)
Default Setting: 250
058 CW LCUT SLOPE
Function: Selects the filter slope of the lower side of the RX audio filter in the CW mode.
Available Values: 6dB/oct or 18dB/oct
Default Setting: 18dB/oct
059 CW HCUT FREQ
Function: Selects the cutoff frequency of the upper side of the RX audio filter in the CW mode.
Available Values: OFF, 700 ~ 4000 Hz (50 Hz/step)
Default Setting: 1200 Hz
060 CW HCUT SLOPE
Function: Selects the filter slope of the upper side of the RX audio filter in the CW mode.
Available Values: 6dB/oct or 18dB/oct
Default Setting: 18dB/oct
061 CW AUTO MODE
Function: Enables/Disables CW keying while operating on SSB mode.
Available Values: OFF, 50M, or ON
Default Setting: OFF
OFF: Disables CW keying while operating on SSB.
50M: Enables CW keying only while operating SSB on 50 MHz (but not on HF).
ON: Enables CW keying while operating on SSB (all TX bands).
062 CW BFO
Function: Sets CW carrier oscillator injection side for the CW mode.
Available Values: USB, LSB or AUTO
Default Setting: USB
USB: Injects the CW carrier oscillator on the USB side.
LSB: Injects the CW carrier oscillator on the LSB side.
AUTO: Injects the CW carrier oscillator on the LSB side while operating on the 7 MHz and below, and the USB side while operating on 10 MHz band and up.
Cont'd Next Page Menu Item Details "Mode-CW Group"
|